Driver Questions

What is ADAS calibration after a collision?

Short answerADAS calibration is the process of re-aiming the cameras and sensors that run driver-assistance features, such as automatic emergency braking and lane keeping, so they see the road correctly. It is often required after windshield replacement, bumper removal, alignment changes or structural repair.
By Young’s Auto Body & Collision, Englewood, COReviewed November 2026

ADAS stands for advanced driver-assistance systems. These features rely on sensors placed around the vehicle: a camera behind the windshield, radar units behind the front bumper or grille, sensors in the rear bumper and cameras in the mirrors. Each sensor is aimed at a precise angle. If the sensor or the part it mounts to is moved even slightly, the system may not see the road the way it was designed to.

When calibration is typically needed

Manufacturers publish when calibration is required. Common triggers include windshield replacement on vehicles with a forward camera, removing or replacing a bumper that holds a radar unit, structural repairs near a sensor, wheel alignment changes and airbag deployment. A warning light is not always present, so the repair procedure is the guide, not the dashboard.

Rear door and quarter panel of a red sedan marked for repair

Static and dynamic calibration

Static calibration is done in a controlled space with targets placed at measured distances from the vehicle. Dynamic calibration is done by driving the vehicle under specific conditions while a scan tool guides the process. Some vehicles require one, some the other, and some both.

What to ask your repair shop

Ask whether the manufacturer’s procedure calls for calibration on your repair, how it will be performed, and whether you will receive documentation. Calibration related to a covered collision belongs on the insurance claim. For related reading, see our windshield replacement, bumper repair and diagnostics pages. Contact us with questions about your vehicle, or call (303) 922-1300.

Key points

ADAS uses cameras, radar and sensors
Each sensor must be aimed precisely
Windshield replacement can require calibration
Bumper and structural repair can too
Alignment changes can affect some systems
Manufacturer procedures set the requirements
Static and dynamic methods both exist
Ask for documentation of any calibration
Questions

ADAS questions

Do all cars need ADAS calibration after an accident?

No. It depends on whether the vehicle has driver-assistance sensors and whether the repair affected them. The manufacturer’s repair procedure says when it is required.

Will a warning light tell me if calibration is needed?

Not always. A sensor can be out of alignment without setting a warning, which is why repair procedures, not dashboard lights, determine the need.

Does insurance pay for calibration?

When calibration is required because of a covered collision repair, it is generally part of the claim. Confirm with your insurer.

Why does a new windshield need calibration?

On many vehicles the forward camera mounts to the windshield. Replacing the glass can change the camera’s aim slightly.

Been in an accident?

Get a free, insurance-ready estimate today. Early bird and night owl drop-off available.

Call (303) 922-1300 Request an Estimate

Areas We Serve

Englewood · Denver · Littleton · Sheridan · Cherry Hills Village · Centennial

Factory Certified

Ford · Subaru · Kia · Hyundai · Volkswagen

Services

Collision · Hail & PDR · Frame · Glass · Paint · Mechanical · Clear Bra · Theft Recovery